Doç. Dr. Alptekin KISASÖZ
Lüleburgaz Havacılık ve Uzay Bilimleri Fakültesi
Alptekin KISASÖZ

Alptekin KISASÖZ
Ünvan
Doç. Dr.
Yabancı Diller
  • İngilizce
Uzmanlık Alanları
  • Malzeme Bilimi
  • Kaynak Metalurjisi
  • Isıl İşlem
  • Döküm
  • Korozyon
Eposta
  • akisasoz@klu.edu.tr
Lisans
Yıldız Teknik Üniversitesi, Kimya Metalurji Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü

Mezuniyet: 2008

Yüksek Lisans
Yıldız Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Metalurji ve Malzeme Mühendisliği Anabilim Dalı

Mezuniyet: 2010

Doktora
Yıldız Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Metalurji ve Malzeme Mühendisliği Anabilim Dalı

Mezuniyet: 2015

Doçent Doktor
Kırklareli Üniversitesi, Lüleburgaz Havacılık ve Uzay Bilimleri Fakültesi, Uçak Bakım ve Onarım Bölümü

Başlama: 2019

Araştırma Görevlisi Doktor
Yıldız Teknik Üniversitesi, Kimya Metalurji Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü

Başlama: 2015

Araştırma Görevlisi
Yıldız Teknik Üniversitesi, Kimya Metalurji Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü

Başlama: 2009

Henüz eklenmiş kayıt bulunmuyor.

SCI-SSCI veya SCI Expended Kapsamındaki Yayınlar

32. Yalçıner G., Özer G., Kisasoz A., Karaaslan A., (2019), Influence of the Phase Balance and Cooling Conditions on the Microstructure and Corrosion Behavior of Solution-treated 1.4462 Duplex Stainless Steel, Materials Research Express, 6(12), pp. 1-9. (1265i5).

 

31. Guler K., Kisasoz A., Ozer G., Karaaslan A., (2019),  Cooling Slope Casting of AA7075 Combined with Reheating and Thixoforging, Transactions of Nonferrous Metals Society of China, 29(11), pp. 2237-2244.

 

30. Ozer G., Kisasoz A., Karaaslan A., (2019), Investigation of the Relationship Between Intergranular Corrosion and Retrogression and Reaging in the AA6063, Materials and Corrosion, 70(12), pp. 2256-2265.

 

29. Kisasoz A., Ozer G., Karaaslan A., (2019), Effect of Secondary Phases on 475 °C Embrittlement of 1.4462 and 1.4501 Duplex Stainless Steels at Short-Term Heat Treatment Conditions, Materials Research Express, 6(11), pp. 1-11. (116595).

 

28. Kisasoz A., (2019), Influence of Solution Treatment on Microstructure, Corrosion Resistance, and Oxidation Behavior of Cast G-NiCr28W Alloy, China Foundry, 16(1), pp. 63-70.

 

27. Kilic O., Acar S., Kisasoz A., Guler K.A., (2018), Investigation of Carbon Contamination in Lost Foam Castings of Low Carbon Steel, China Foundry, 15(5), pp. 384-389.

 

26. Acar S., Gecu R., Kisasoz A., Guler K.A., Karaaslan A., (2018), A Study on Al/Cu Bimetal Production by Lost Foam Casting, Praktische Metallographie-Practical Metallography, 55(11), pp. 728-740.

 

25. Kisasoz A., (2018), Corrosion Behavior of Alloy AA6063-T4 in HCl and NaOH Solutions, Materials Testing, 60(5), pp. 478-482.

 

24. Gecu R., Acar S., Kisasoz A., Guler K.A., Karaaslan A., (2018), Influence of T6 Heat Treatment on A356 and A380 Aluminium Alloys Manufactured by Thixoforging Combined with Low Superheat Casting, Transactions of Nonferrous Metals Society of China, 28(3), pp. 385-392.

 

23. Turker M., Acar S., Comert Z.Y., Kisasoz A., Guler K.A., (2018), Characterization of Mechanical Properties and Corrosion Behaviours of Mn And Al Bronze Castings, Praktische Metallographie-Practical Metallography, 55(1), pp. 5-18.

 

22. Guler K.A., Gecu R., Kisasoz A., Karaaslan A., (2017), Investigation of Spherisation in Microstructures of Aluminium Casting Alloys for Thixoforging Process, Russian Journal of Non-Ferrous Metals, 58(5), pp. 489-494.

 

21. Kisasoz A., Guler K.A., Karaaslan A., (2017), Influence of Orbital Shaking on Microstructure and Mechanical Properties of A380 Aluminium Alloy Produced by Lost Foam Casting, Russian Journal of Non-Ferrous Metals, 58(3), pp. 238-243.

 

20. Güler K.A., Gecü R., Kisasoz A., Karaaslan A., (2017), A Comparative Study on the Microstructure Evaluation of Thixoforged A356 and A380 Aluminium Alloys, Praktische Metallographie-Practical Metallography, 54(3), pp. 163-177.

 

19. Kisasoz A., Karaaslan A., Bayrak Y., (2017), Effect of Etching Methods in Metallographic Studies of Duplex Stainless Steel 2205, Metal Science and Heat Treatment, 58(11-12), pp. 704-706.

 

18. Karaaslan A., Kisasoz A., Atapek Ş.H., Guler K.A., (2016), Dry Sliding Behavior of Cast A7075 and A7075 / SAF 2205 Composite Materials, High Temperature Materials and Processes, 35(5), pp. 487-492.

 

17. Turker M., Comert Z.Y., Kisasoz A., Guler K.A., (2016), Experimental Research on Properties of Naval Brass Castings, Praktiche Metallographie-Practical Metallography, 53(1), pp. 24-35.

 

16. Kisasoz A., Gurel S., Karaaslan A., (2016), Effect of Annealing Time and Cooling Rate on Precipitations in Duplex Stainless Steel, Metal Science and Heat Treatment, 57(9-10), pp. 544-547.

 

15. Guler K.A., Kisasoz A., Karaaslan A. (2015), A Study of Expanded Polyethylene (EPE) Pattern Application in Aluminium Lost Foam Casting, Russian Journal of Non-Ferrous Metals, 56(2), pp. 171-176.

 

14. Guler K.A., Kisasoz A., Karaaslan A., (2014), Investigation of Al/Steel Bimetal Composite Fabrication by Vacuum Assisted Solid Mould Investment Casting, Acta Physıca Polonıca A, 126(6), 1327-1330.

 

13. Kisasoz A., Karaaslan A., Finite Element Analysis of 2205 Duplex Stainless Steel Welds, Materials Testing, 56(10), (2014), pp. 795-799.

 

12. Guler K.A., Kisasoz A., Karaaslan A., (2014), Effects of Pattern Coating and Vacuum Assistance on Porosity of Aluminium Lost Foam Castings, Russian Journal of Non-Ferrous Metals, 55(5), pp. 424-428.

 

11. Guler K.A., Kisasoz A., Karaaslan A., (2014), Investigation of Lost Foam Casted Aluminum Bimetal Microstructures, Materials Testing, 56(9), pp. 737-740.

 

10. Guler K.A., Kisasoz A., Karaaslan A., (2014), Fabrication of Al/Mg Bimetal Compound Casting by Lost Foam Technique and Liquid-Solid Process, Materials Testing, 56(9), pp. 700-702.

 

9. Toptop G.O., Kisasoz A., Karaaslan A., (2013), Effect of Alloying Elements on the Tooling Capabilities of High Speed Steels Fabricated by Powder Metallurgy, Materials Testing, 55(1), pp. 43-46.

 

8. Guler K.A., Kisasoz A., Karaaslan A., (2013), The Fabrication and Characterization of Al/SiC-MMC Castings Produced by Vacuum Assisted Solidmould Investment Casting Process, Russian Journal of Non-Ferrous Metals, 54(4), pp. 320-324.

 

7. Kisasoz A., Toptop G.O., Karaaslan A., (2013), Effects of Alloying Elements with Various Heat Treatment Processes on the Properties of High Speed Steels, Kovove Materialy-Metallic Materials, 51(3), pp. 205-209.

 

6. Kisasoz A., Guler K.A., Karaaslan A., (2012), Infiltration of A6063 Aluminium Alloy into SiC-B4C Hybrid Preforms Using Vacuum Assisted Block Mould Investment Casting Technique, Transactions of Nonferrous Metals Society of China, 22(7), pp. 1563-1567.

 

5. Toptop G.O., Kisasoz A., Karaaslan A., (2012), Effects of Co as an Alloying Element and Heat Treatment Processes on the Properties of High Speed Steels, Materials Testing, 54(6), pp.  427-430.

 

4. Kisasoz A., Karaaslan A., (2012), Influence of Heat Treatment and Thermochemical Processes on the Properties of the Steel X 38 CrMoV 5 3, Materials Testing, 54(2), pp. 103-107.

 

3. Guler K.A., Kisasoz A., Yuksel C., Karaaslan A., (2012), Mechanical Properties of A6063/SiC Composites Produced Using the Lost Foam Casting Process, Materials Testing, 54(3), pp. 189-192.

 

2. Guler K.A., Kisasoz A., Karaaslan A., (2011), A Novel Method for Al/SiC Composite Fabrication: Lost Foam Casting, International Journal of Materials Research, 102(3), pp. 304-308.

 

1. Kisasoz A., Guler K. A., Karaaslan A., (2011), Fabrication and Characterization of SiC Preforms for Metal Matrix Composites, Materials Testing, 53(1), pp. 634-637.

Uluslararası Hakemli Dergilerdeki Yayınlar

2. Guler K.A., Kisasoz A., Karaaslan A., (2014), Fabrication of Al-Steel Composites by Vacuum Assisted Block Mould Investment Casting Technique, Machines Technologies Materials, 8(10), pp. 47-49.

 

1. Kisasoz A., Guler K.A., Karaaslan A., (2014), Aluminium Bimetal Structure Production by Lost Foam Casting with Liquid-Liquid Process, Machines Technologies Materials, 8(10), pp. 43-46.

Ulusal Hakemli Dergilerdeki Yayınlar

4. Kısasöz, A., (2018), AA6063 Alüminyum Alaşımının H2SO4 Ortamındaki Korozyon Davranışına Yaşlandırma Süresinin Etkisi, Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 7 (2), pp. 979-985.

 

3. Kısasöz, A., Karaaslan, A., (2016), Effect of Heat Input on Weld Microstructure in TIG Welding of Duplex Stainless Steels, Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 31(1. Özel Sayı), pp. 143-146.

 

2. Kısasöz A., K.A. Güler, Karaaslan A., (2014), Metal Matris Kompozitlerin Vakum İnfiltrasyonla Dereceli Hassas Döküm Kalıplarında Üretimi, Metalurji, 170, pp. 34-38.

 

1. Kısasöz A., Karaaslan A., (2012), Dubleks Paslanmaz Çeliklerde Oluşan Yüksek Sıcaklık Fazlarına Genel Bir Bakış, Metalurji, 162, pp. 57-61.

Uluslararası Konferans ve Sempozyumlar

32. Kisasoz A., Karaaslan A., Electrochemical Corrosion Behavior of Solution Treated UNS32205 Duplex Stainless Steel, 4th International Iron and Steel Symposium (UDCS’19), 4-6 April 2019, pp. 287-289.

 

31. Acar S., Gecü R., Kisasoz A., Güler K.A., Karaaslan A., A Study on the Effects of Solution Heat Treatment Time on Eutectic Silicon Morphology for A380 Alloy, 19th International Metallurgy and Materials Congress, Istanbul, Turkey, 25-27 October 2018, pp. 304-306.

 

30. Öztürk K., Kisasoz A., Karaaslan A., Effect of Preform Binders on the Properties of AA7075 Matrix Composites, 19th International Metallurgy and Materials Congress, Istanbul, Turkey, 25-27 October 2018, pp. 265-268.

 

29. Canbay G., Kisasoz A., Karaaslan A., Effect of Preheating Treatment on Corrosion Behavior of AA6063 Alloy, 19th International Metallurgy and Materials Congress, Istanbul, Turkey, 25-27 October 2018, pp. 291-293.

 

28. Gecu R., Kisasöz A., Karaaslan A., Sliding Wear Characteristics of AISI 2205 Duplex Stainless Steel Cooled in Various Environments after Solution Treatment, 19th International Metallurgy and Materials Congress, Istanbul, Turkey, 25-27 October 2018, pp. 837-840.

 

27. Tumer M., Kisasoz A., Karaaslan A., Investigation of Microstructure and Corrosion Properties of the Inconel 625 Weld, 5th International Conference on Welding Technologies and Exhibition, Sarajevo, Bosnia and Herzegovina, 26-28 September 2018, pp. 273-277.

 

26. Gecu R., Acar S., Kisasoz A., Guler K.A., Karaaslan A., Dry Sliding Wear Properties of AA7075 Aluminium Matrix Hybrid Composites, 2nd International Conference on Engineering Technology and Innovation (ICETI), Budapest, Hungary, 7-11 March 2018, pp.295-300.

 

25. Acar S., Gecu R., Kisasoz A., Guler K.A., Karaaslan A., Investigation of the Effects of Solution Heat Treatmeant Time on the Eutectic Silicon for A356 Alloy, 2nd International Conference on Engineering Technology and Innovation (ICETI), Budapest, Hungary, 7-11 March 2018, pp.268-272.

 

24. Kisasoz A., Investigating the Corrosion Behaviour of AA6060 Alloy in NaOH-Na2SiO3 Solution, 2nd International Conference on Engineering Technology and Innovation (ICETI), Budapest, Hungary, 07-11 March 2018, pp. 46-50.

 

23. Ozturk K., Kisasoz A., Karaaslan A., Fabrication of AA7075-SiCp Composite, 1st International Symposium on Light Alloys and Composite Materials, Karabük, Turkey, 22-24 March 2018, pp. 273.

 

22. Kisasoz A., A Kinetic Study for Artificially Aged AA6060 Alloy, 1st International Symposium on Light Alloys and Composite Materials, Karabük, Turkey, 22-24 March 2018, pp. 265.

 

21. Gecu R., Acar S., Kisasoz A., Guler K.A., Karaaslan A., Aging of A356 Aluminum Billets Produced by Semi-Solid Metal Processing, 3rd International Iron & Steel Symposium, Karabük, Turkey, 3-5 April 2017, pp. 267-270.

 

20. Kisasoz A., Karaaslan A., Determining the Corrosion Behaviour of EN 1.4462 Duplex Stainless Steel in FeCl3 Media for Various Solution Treatment Conditions, 3rd International Iron & Steel Symposium, Karabük, Turkey, 3-5 April 2017, pp. 201-203.

 

19. Kisasoz A., Tumer M. , Karaaslan A., Effect of Multipass Welding on Microstructure and Mechanical Properties of AISI 2205 Duplex Stainless Steel, 3rd International Iron & Steel Symposium, KarabükTurkey, 3-5 April 2017, pp. 66-68.

 

18. Turker M., Acar S., Comert Z.Y., Kisasoz A., Guler K.A., Corrosion, Mechanical and Microstructural Characteristics of Modified Navy G Bronze Casts, International Conference on Engineering Technology and Innovation, Sarajevo, Bosnia and Herzegovina, 22-26 March 2017, pp. 303-305.

 

17. Gecu R., Acar S., Kisasoz A., Guler K.A., Karaaslan A., Microstructural Evaluation of T6-Treated A380 Alloy Manufactured by Semi-Solid Metal Casting, International Conference on Engineering Technology and Innovation, Sarajevo, Bosnia and Herzegovina, 22-26 March 2017, pp. 284-288.

 

16. Kisasoz A., Karaaslan A., Variation of Microstructure and Mechanical Properties of 2205 Duplex Stainless Steel for Solution Treatment at 1150 °C, International Conference on Engineering Technology and Innovation, Sarajevo, Bosnia and Herzegovina, 22-26 March 2017, pp. 170-174.

 

15. Kisasoz A., Tufenk E., Karaaslan A., Influence of Solution Heat Treatment at 1180°C on the Properties of 2.4879 Alloy, International Conference on Engineering Technology and Innovation, Bosnia and Herzegovina, 22-26 March 2017, pp. 166-169.

 

14. Zorba A.P., Özyılmaz A.Ö., Gecü R., Kısasöz A., Karaaslan A., The Effect of Intermetallic Phases on Corrosion Behaviour of Duplex Stainless Steels, 18. International Metallurgy and Materials Congress (IMMC 2016), Istanbul, Turkey, 29 Septemper-1 October 2016, pp. 836-839.

 

13. Guler K.A., Kısasöz A., Karaaslan A., Özer G., Microstructural Evaluation of Thixoforged A380 Alloy Billets Produced by Low Superheat Casting Process, 18. International Metallurgy and Materials Congress (IMMC 2016), Istanbul, Turkey, 29 Septemper-1 October 2016, pp. 659-662.

 

12 Gecu R., Kısasöz A., Karaaslan A., An Investigation of the Effect of Solution Heat Treatment on 475 ˚C Embrittlement in 1.4462 Duplex Stainless Steels, 18. International Metallurgy and Materials Congress (IMMC 2016), Istanbul, Turkey, 29 Septemper-1 October 2016, pp. 501-503.

 

11. Gecü R., Kısasöz A., Guler K.A., Karaaslan A., Manufacturing and Aging of 7075 Based Metal-Metal Composites by Using Sawdusts as Reinforcements, 18. International Metallurgy and Materials Congress (IMMC 2016), Istanbul, Turkey, 29 Septemper-1 October 2016, pp. 114-117.

 

10. Kısasöz A., Gecü R., Karaaslan A., Determination of Temperature Gradient in TIG Welding of Duplex Stainless Steel, 4th International Conference on Welding Technologies and Exhibition. 4th International Conference on Welding Technologies and Exhibition (ICWET’16), Gaziantep Turkey, 11-13 May 2016, pp. 650-654.

 

9. Kısasöz A., Karaaslan A., Effect of Heat Input on Weld Microstructure in TIG Welding of Duplex Stainless Steels, 4th International Conference on Welding Technologies and Exhibition. 4th International Conference on Welding Technologies and Exhibition (ICWET’16), Gaziantep Turkey, 11-13 May 2016, pp. 645-649.

 

8. Kisasoz A., Atapek Ş.H., Karaaslan A., Wear Behavior of Aged DIN 1.4462 Duplex Stainless Steels, 4. International Conference of Engineering Against Failure (ICEAF IV), Skiathos, Greece, 24-26 June 2015, pp. 121-128.

 

7. Kara S., Guler K.A., Kisasoz A., Lost Foam Castings with EPS Foam Patterns in Different Densities, International Conference on Advances in Mechanical Engineering (ICAME’15), Istanbul, Turkey, 13-15 May 2015, pp. 1133-1136.

 

6. Kısasöz A., Karaaslan A., Finite Element Analysis of SAF 2205 Duplex Stainless Steel Weldments, 3. International Conference on Welding Technologies and Exhibition, Manisa, Turkey, 21-23 May 2014, pp. 271-279.

 

5. Kısasöz A., Karaaslan A., Ferritik-Östenitik Çeliklerde Sıcaklığın Mekanik Özellikler Üzerindeki Etkisinin Modellenmesi, 10. Uluslararası Kırılma Konferansı, Kayseri, Türkiye, 24-26 Nisan 2014, pp. 327-332.

 

4. Kisasoz A., Guler K.A., Karaaslan A., Production of Al2O3-Al Composites Using Vacuum Assisted Block Mold Investment Casting, 8th International PhD Foundry Conference, Brno, Czech Republic, 7-8 June 2010, pp. 1-10.

 

3. Ozer G., Kisasoz A., Guler K.A., Karaaslan A., Aluminum Matrix Composite Fabrication by Infiltration of SiC Preforms Using Squeeze Casting Technique, 8th International PhD Foundry Conference, Brno, Czech Republic, 7-8 June 2010, pp. 1-9.

 

2. Kisasoz A., Guler K.A., Karaaslan A., Lost Foam Casting Technique Applications for Al/SiC Composite Production, 69th World Foundry Congress, Hangzhou, China, 16-20 October 2010, pp. 573-576.

 

1. Kısasöz A., Tandoğan G., Luş M., Karaaslan A., Kuşkonmaz N., Metal Matrisli Kompozit Üretimi İçin SiC İçerikli Ön Şekil Üretimi, International Foundry and Environment Symposium (IFES2009), Istanbul, Türkiye, 28-29 Ocak 2010, pp. 162-166.

Ulusal Konferans ve Sempozyumlar

5. Gecü R., Kısasöz A., Karaaslan A., Soğuk İş Takım Çeliklerinde Cr ve V İçeriğinin Malzeme Özellikleri Üzerindeki Etkisinin İncelenmesi, 5. Isıl İşlem Sempozyumu (5. HTS), İstanbul, 2-3 Haziran 2016, pp. 240-247.

 

4. Kısasöz A., Karaaslan A., Çift Fazlı Paslanmaz Çeliklerde Yaşlandırma Koşullarının Mikroyapı Özellikleri Üzerindeki Etkisinin İncelenmesi, 5. Isıl İşlem Sempozyumu (5. HTS), İstanbul, 2-3 Haziran 2016, pp. 175-182.

 

3. Kakaçoğlu G., Sığırtmaç T., Karaaslan A., Kısasöz A., Al-Si Kaplamalı Otomotiv Çeliklerinde Lazer Kaynaklı Birleştirme Uygulamaları, 7. Otomotiv Teknolojileri Kongresi (OTEKON’14), Bursa, 26-27 Mayıs 2014.

 

2. Kısasöz A., Karaaslan A., Dubleks Paslanmaz Çeliklerde İkincil Faz Oluşumuna Sıcaklığın ve Sürenin Etkisi, 4. Isıl İşlem Sempozyumu (4. HTS), İstanbul, 24-25 Ekim 2013, pp. 22-28.

 

1. Kısasöz A., Yeşildal C., Karaaslan A., Otomotiv Sektöründe Kullanılan Sacların TIG ve Direnç Nokta Kaynağı İle Birleştirilmesi, Kaynak Teknolojisi VII. Ulusal Kongre ve Sergisi, Ankara, 13-14 Kasım 2009, pp. 183-192.

Projeler

9. "Dubleks Paslanmaz Çeliklerde Sigma Fazı Oluşumunu Ortaya Koyan Johnson Mehl Avrami Kolmogorov Eşitliğinin Geliştirilmesi", 218M176 numaralı TÜBİTAK 3001 Projesi, Kasım 2018-Devam Ediyor, Yönetici.

 

8. "Isıya Dayanıklı 2.4879 Alaşımının Yüksek Sıcaklık Uygulamalarındaki Özellik Değişimlerinin Belirlenmesi", YTÜ BAPK Projesi, Haziran 2017-Haziran 2019, Yönetici.

 

7. "Çift Fazlı Paslanmaz Çelikte Ferrit-Östenit Faz Dengesinin 475 °C Kırılganlığı Üzerindeki Etkisinin İncelenmesi", YTÜ BAPK Projesi, Haziran 2017-Haziran 2019, Araştırmacı.

 

 

6. "Geri Dönüştürülebilir Metal Takviyeler Kullanılarak Üretilen Alüminyum Matrisli Metal-Metal Kompozitlerin Aşınma Özelliklerinin Belirlenmesi", YTÜ BAPK Projesi, Haziran 2017-Haziran 2019, Araştırmacı.

 

5. "Alüminyum Alaşımları için Düşük Üst Isılı Dökümle Bağlantılı Yarı-Katı Dövme Yönteminin Araştırılması", YTÜ BAPK Projesi, Eylül 2015-Eylül 2017, Araştırmacı.

 

4. "Dubleks Paslanmaz Çeliklerin Isıl İşleminde Isıl Girdilerin Modellenmesi", YTÜ BAPK Projesi, Ocak Ekim 2013-Nisan 2015, Araştırmacı.

 

3. "Savunma Sanayiinde Kullanılan Dubleks Paslanmaz Çeliğin Kaynağında Isıl Girdilerin Modellenmesi ve Deneysel Verilerin Eldesi", YTÜ BAPK Projesi, Haziran 2013-Haziran 2015, Araştırmacı.

 

2. "Dubleks Paslanmaz Çeliklerde Sigma ve Chi Fazlarının Etkilerinin Isıl Yöntemler İle Giderilmesi", YTÜ BAPK Projesi, Kasım 2012-Mayıs 2014, Araştırmacı.

 

1. "Sıkıştırmalı Döküm Yöntemi İle Al Matrisli Hibrid Takviyeli Kompozit Üretimi ve Karakterizasyonu", YTÜ BAPK Projesi, Ocak 2007-Ocak 2009, Araştırmacı.

Diğer

Eğitim ve Sertifikalar

Patent Yazım Eğitimi, Yıldız Teknik Üniversitesi Teknoloji Transfer Ofisi, 20 Haziran 2014.

 

Ansys Başlangıç Eğitimi, FİGES Mühendislik, 10-11 Şubat 2014.

 

TS EN ISO/IEC 17043:2010 Uygunluk Değerlendirmesi-Yeterlilik Deneyi için Genel Şartlar Standart Eğitimi, UAC Mühendislik ve Eğitim Hizmetleri, 25-26 Temmuz 2013.

 

TS EN ISO/IEC 17028:2010 Deney ve Kalibrasyon Laboratuvarlarının Yeterliliği için Genel Şartlar Standardı İç Denetçi Eğitimi, UAC Mühendislik ve Eğitim Hizmetleri, 18-19 Nisan 2012.

 

TS EN ISO/IEC 17028:2010 Deney ve Kalibrasyon Laboratuvarlarının Yeterliliği için Genel Şartlar Standart Eğitimi, UAC Mühendislik ve Eğitim Hizmetleri, 16-17 Nisan 2012.

Henüz eklenmiş kayıt bulunmuyor.

Henüz eklenmiş kayıt bulunmuyor.

Henüz eklenmiş kayıt bulunmuyor.

Telefon Tablet Bilgisayar Bu website tüm cihazlarla uyumludur.
Facebook
Twitter
Google Plus